· MODELTRONIC Racing Drone Eachine Wizard X220 Racer F3 6DOF FPV 5.8G RTF

· 2 x 2205 2300kv motor cw. 2 x 2205 2300kv motor ccw.

· 4 x Eachine 20a blheli_s esc variators and 3S 11.1V 1500mah 25c xt60 battery.

· 1 x F3 6dof flight controller already installed.

· Flysky transmitter i6 2.4g 6ch remore control, interference-free.

· Includes bracket for mounting AEE or Gopro cameras

· WiFi: 40m-70m

· • the chassis of the drone is built in carbon fiber of 4 millimeters which gives it a lot of resistance, the chassis has a protector also not seen in the photos which makes it more aerodynamic and prevents it from getting electronic dirt. The estimated flight time is 12 minutes, its total weight with the coming battery is about 484 grams. the engines of the eachine wizard x220 are of reference mn2204 and 2300kv, a type of engine already very typical in the family of eachine drones, are engines that can support batteries from 2s to 4s, are handled or controlled by esc 20 amps whose internal firmware is blheli_s, can handle a peak current for 10 seconds of 25 amps, these esc are very light each of only 7.9 grams and also support up to 4s batteries. If we want to update this drone and give it more power or speed, we can start by changing the engine protectors that the drone brings in each engine, for a different one similar to those used by the eachine falcon that make the engines tilt of more or less 10 degrees forward. Also the arms can support larger engines of references 2206 and 2208. • wheelbase: 220mm • chassis arm: 4mm carbon fiber • flight times: 12 minutes with standard battery but can reach more than 16 minutes with 2.200mah lipo.


Maneuverability
5
Design
5
Control Method
5
Camera and/or FPV
5
Resistance
5
Autonomy
5
No reviews ... Be the first and share your eXperience with the WikDrone community!
back to top