· LHI MICRO MINIMOSD Minim OSD Mini OSD W/ KV TEAM MOD For Naze32

· ATmega328P with Arduino bootloader MAX7456 monochrome on-screen display 15x15MM Size!

· The Micro MinimOSD is the next evolution of minimization. The Minimosd was engineered to bring users a very powerfull OSD at a unreal cost. After all the community mods, we re-engineered the OSD so every useable pin was easy available.(no more surface soldering) From the manfactures of the WitesSpy KV Team OSD and all your requests have now envoled into the Micro MinimOSD!

· With all the features of the very popuar WiteSpy KV Team modded OSD but in a 15x15MM size. The only differenece is that It does NOT have the Dc/Dc converter. this means less heat when powered off a Flight controller. The Micro MinimOSD is the same as the older MinimOSD hardware, but has been modified to take advantage of custom firmware options.

· You can choose firmware that is MAVLink compatible for ArduCopter, or MultiWii Serial compatible for MultiWii and Baseflight/Cleanflight control boards. You can connect two batteries up to 4S so you can see the main flight battery voltage. the second port will allow your FPV battery voltage on the display as well. we also did not forget about the pin for analog or digital PWM RSSI and a connection where you can attach a current sensor.

· Features: Modifications for direct connection of two batteries (up to 4S) Pad for an Analog or Digital PWM RSSI signal Pad for the connection of a Current Sensor ATmega328P with Arduino bootloader Standalone, or with APM/ Flip / Flip32+ flight controllers These modifications allow direct connection of two batteries (up to 4S) Big thank you to the KV Team and the OSD firmware and the multiwii-osd team This hardware take the hardware mods for this firmware, and builds them into an RTF solution. This Board can be used just as a normal OSD for APM or it can be used with MWC KV Team Mod . Specifications ATmega328P with Arduino bootloader MAX7456 monochrome on-screen display FTDI cable compatible pinout Standard 6-pin ISP header Two independent power sections with an LED indicator on each Solder jumpers for combining the power sections +5V 500mA regulator for up to +12V supply input Solder jumper for PAL video option Exposed test points for HSYNC and LOS Dimensions: 0.7W x 1.7L (2.4 w/ pins as shown) x 0.3H MINIMOSD, A MINIMAL ARDUINO-BASED ON-SCREEN DISPLAY BOARD. Package Included: 1 pc Micro Minim osd baord


Utility
5
Quality
5
Design
5
Resistance
5
Meet expectations
5
Comply as specified
5
No reviews ... Be the first and share your eXperience with the WikDrone community!
back to top