· LITEBEE Matek F405-WING Flight Controller F4 FC Built-in OSD BEC & Current Sensor on Board for RC FPV Racing Drone (F405-WING)

· Current Senor: 104A, 3.3V ADC, Scale 317,Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm.

· 4x BEC on board:2x Motors, 7x Servos outputs , 2x I2C , 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)

· MCU: 168MHz STM32F405 , IMU: MPU6000 accelerometer/gyro (SPI) , Baro: BMP280 (I2C) , OSD: INAV OSD w/ AT7456E chip , Blackbox: MicroSD card slot (SD/SDHC).

· Much more details, pls click here:http://www.mateksys.com/?portfolio=f405-wing#tab-id-2

· FLIGHT CONTROLLER F405-WING (NEW)STM32F405, MPU6000, INAVOSD, BMP280, 6x UARTs, 1x Softserial, 2x I2C, 2x Motors & 7x Servos, 4x BEC & current sensor on board.FC SpecificationsMCU: 168MHz STM32F405IMU: MPU6000 accelerometer/gyro (SPI)Baro: BMP280 (I2C)OSD: INAV OSD w/ AT7456E chipBlackbox: MicroSD card slot (SD/SDHC)VCP & 6x UARTs2x Motors, 7x Servos outputs2x I2C3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)Built in inverter for SBUS input (UART2-RX)PPM/UART Shared: UART2-RXSoftSerial on TX2 padBattery Voltage Sensor: 1:10 (Scale 1100)WS2812 Led Strip : YesBeeper : YesRSSI: YesFC FirmwareINAV FlightTarget: MATEKF405SEPDBInput voltage range: 9~30V (3~6S LiPo) w/TVS protection2x ESC power padsCurrent Senor: 104A,  3.3V ADC,  Scale 317BEC 5V outputDesigned for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeedContinuous current: 2 Amps, Max.3ABEC 9V /12V outputDesigned for Video Transmitter, Camera, Gimbal ect.Continuous current: 2 Amps, Max.3A12V option with Jumper padBEC Vx outputDesigned for ServosVoltage adjustable, 5V Default, 6V or 7.2V via jumperContinuous current: 5 Amps, Max.6AOutput Ripple: 50mV (VIn=24V, VOut=5V 5A load)BEC 3.3V outputDesigned for Baro / Compass module and Spektrum RXLinear RegulatorContinuous current: 500mAPhysicalMounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mmDimensions: 56 x 36 x 13 mmWeight: 25g

Meet expectations
Comply as specified
No reviews ... Be the first and share your eXperience with the WikDrone community!
back to top